Many users still don’t know the correct ways how to clean epilator, a shame considering that the crucial importance of the matter! Since an epilator grabs and pulls hair strands from their roots, as well as come in direct contact with the skin, it can become caked with your body’s natural oils, stray hairs, and dirt. Over time, a dirty epilator will increase your chances of getting severe skin irritations including redness, bumps and ingrown hairs, even infections like cystic acne.
There’s also no excuse for letting your epilator become dirty! Most epilators are easy to clean, as well as don’t require expensive tools and supplies.
You will only need 5 minutes, at least, to clean your epilator – and it’s time well spent considering that a clean epilator will last longer.
Cleaning your epilator after each use will also mean getting excellent results the next time you use it. This is because the epilator’s tweezers can more effectively grab and pull hair so you will get smoother results than with waxing and shaving.
How to Clean Your Epilator: General Tips
The best epilators come with a user’s manual with a step-by-step set of instructions on cleaning them. Regardless of the differences in their design and, thus, in cleaning them, you will likely require the following supplies:
- A bristle brush for removing the buildup of gunk on the epilator’s head
- Mild detergent soap
- Rubbing alcohol
- Cotton ball
- A dry, clean hand towel
We also want to emphasize these general tips on how to clean epilator before we go into the details.
- Always read the manufacturer’s instructions before using and cleaning your epilator for the first time. This is especially true when you’re a newbie to epilating or when you’re using a new model.
- Clean your epilator after each use. Since you will only be using it once every three weeks or so – the hair regrowth rate with epilation is three to six weeks – it shouldn’t be too much trouble in your busy lifestyle.
Use another epilator on your face and another on your body, if possible. While it can mean extra cost, it will be worth it since it’s important to clean the epilator when you’re switching its use to another part of your body. You don’t want to wait for 1-2 hours while waiting for the epilator to become completely dry, as will likely be the case when you’re using a single epilator for your face and bikini area.
- Never use harsh chemicals and hard objects, such as a brush with hard bristles, in cleaning an epilator since these can cause damage to the unit’s head and its tweezers.
- Gather the cleaning supplies before using an epilator and place them on a flat surface, such as a table or countertop. You can save time and effort in this manner, a must in your busy lifestyle.
- Take your time when cleaning the epilator head and its tweezers. The latter can cut through skin so it’s best to keep safe by being aware of your movements when cleaning them.
- Wear rubber gloves when removing the head and cleaning the tweezers for safety reasons.
And be sure to turn off and unplug the epilator before cleaning it!
How to Clean Epilator Head
The following are the general step-by-step instructions for cleaning your epilator. Again, these steps may or may not differ from the instructions on your epilator’s manual.
Remove the epilator head.
The head is the part that comes in direct contact (i.e., brushes or moves) against your skin and that contains the tweezers for removing hair. The head is, as can be expected, the part where most of the bacteria will live when it isn’t cleaned after each use.
Don’t worry as the head can be easily removed in most epilators. Most of them also have buttons on one or both sides of the head that can be pressed, thus, releasing the head. The mechanism is similar to the disposable blade cartridges on razors so it’s familiar to men and women who have chosen shaving as a hair removal method.
Just hold the head in your dominant head and press the buttons at its side with your other hand. This will release the head from the epilator’s body.
Clean the epilator head.
Once the epilator head has been removed, you can start cleaning it. You can use either a clean toothbrush or a small brush with long, soft and flexible bristles, which came with the epilator in its package, in removing the gunk from the epilator head. You can use the latter, too, for cleaning the part where the head attaches to the epilator’s body since it has the perfect design for it.
If the epilator came with its own brush, you should use it to move through the grooves in its head until it’s thoroughly clean.
You should use it as well for cleaning all the tweezers - and the epilator with most tweezers will require a longer time to clean since you have to ensure that every nook and cranny will be cleaned.
If the epilator didn’t come with its own cleaning brush, you should use a new toothbrush with soft bristles as a substitute. Don’t use an old toothbrush since it will likely harbor gunk, such as toothpaste and food residues that can be transferred to the head and tweezers. Use the new toothbrush as a dedicated brush for your epilator but change it, too, when its bristles become too soft to remove unwanted gunk from the head.
Use compressed air, if necessary.
With a little elbow grease and the dedicated cleaning brush, you should be able to remove all of the hair and gunk from the epilator head. But there may be instances when strands of hair become wrapped around or between the tweezers. Even when it seems inconvenient, you should remove them for sanitary reasons.
Don’t fret as stubborn strands of hair can be removed using compressed air, preferably from a can that can be bought from the electronics section of many department stores. The can of compressed air usually comes with an attachment hose used for directing air into the desired areas. Just point the hose toward the part of the tweezers where the strands of hair are located and watch as these are removed.
The compressed air will also remove the hair strands lodged beneath the head, as well as the dead skin cells on the head and tweezers.
Wash the epilator head.
Once you have removed the hair from the epilator head, you should wash it. This should remove the invisible dead skin cells, dirt and bacteria that are still in the head. Again, we suggest reading the manufacturer’s suggestions about washing the epilator with detergent, soap and other cleansers.
Most epilators can be washed under warm running water while many of them don’t require soaps and detergents for a thorough cleaning. If your epilator can be washed with running water, keep its head under the tap for 2-3 minutes to ensure that the water will run through every nook and cranny of the tweezers.
Flip the head over so that the water also washes its underside. Otherwise, your efforts at thoroughly cleaning the epilator head will be in vain since the underside can also harbor stray hairs, dead skin cells, and bacteria.
Be sure to sanitize the head and tweezers, too, as discussed in another section.
Let the head dry completely.
This is an important step since not allowing the epilator head to become completely dry can result in rust, which will shorten its life and increase your risk of infections.
There’s also the matter of bacteria thriving in wet conditions so a wet epilator will likely encourage the growth of bacteria than a dry one.
Don’t dry the epilator head with a hand towel as the fibers can be snagged in the tweezers, which will require time and effort to remove. We suggest air-drying instead, which will take several hours but it’s worth the wait. You may have to wait for a day or two until the moisture evaporates from the head and tweezers.
But don’t stop with cleaning your epilator after each use. Be sure to store it properly, too, when it isn’t in use. You can store it in a small bag or in its dedicated storage unit, as well as in a cool, dry area.
But these ways how to clean an epilator aren’t the end of maintaining the best temporary hair removal device invented by man. You should also replace the head when it looks damaged, rusted, or worn out. You must check it for said damages whenever you clean the unit, as well as be informed about its warranty and replacement parts.
How to Clean Emjoi Epilator
Cleaning your Emjoi epilator also requires the abovementioned steps if you want a more thorough cleaning. But it can also be quickly cleaned by following these steps:
- Turn off the unit.
- Remove the head.
- Dip a cotton swab in rubbing alcohol and squeeze it to remove excess moisture.
- Brush the cotton swab over the tweezers.
Wear rubber gloves, too, to avoid cutting your fingers on the tweezers.
How to Clean My Braun Epilator
Most, if not all, Braun epilators come with a cleaning brush that can be used in the removal of hair and gunk on the tweezers. These units also come with cleaning instructions and most of these instructions are the same as the ones mentioned for cleaning epilators in general.
How to Sterilize Tweezers
Don’t stop with the ways how to clean tweezers either! You should also sanitize them.
There are two ways you can sterilize the head and tweezers. First, place a couple of drops of antibacterial dish soap into a bowl with enough depth to cover the epilator head. Pour warm water into the bowl until it’s nearly full. Place the epilator head into the mixture and let it sit for five minutes before rinsing with cold water; allow it to air dry.
Second, learn how to clean epilator with alcohol, an easy chore. Dip a cotton ball or swab into rubbing alcohol, squeeze it until it’s only damp, and carefully run it over the tweezers.
If you still have doubts about different features, read our guide to how to use an epilator!
Don’t want to use an epilator just yet for any reason? To get rid of hair differently, read our best hair removal cream reviews!